| BAG-O-FORM Curing Press Data |
| Type: | Twin-Cavity steam platen with sectional mold capability |
| Bladder Mechanism: | 3½" S.S. Center Mechanism |
| Loader: | ACCU-LOADER® precision with 6 shoes |
| Unloader: | Carry tires back, hold, and place on discharge system. |
| General Capacities |
| Press Closing Force (max. per cavity) | 385,000 Lbs. |
| Max mold diameter | 46" |
| Min mold thickness | 10" |
| Max mold thickness | 20" |
| Max internal pressure | 400 psi (20 kg/cm2) |
| Max green tire height | 20" (508 mm) |
| Bead diameter range | 13" -17" or 15" -19" |
| Center Mechanism | S.S.3½" Double Acting |
| Bead lift | Two (2) independent cylinders |
| Nominal stripping force @250 psi | 7,000 Lbs. |
| Recommended top mold weight max | 5,500 Lbs. |
| Unloading clearance | 12" Segment Mold
18" Split Mold |
| Top platen mold bolt holes | 1" dia. @28" (711mm) B.C.
1.25" dia. @32" (813 mm) B.C.
1.25" dia. @36" (914 mm) B.C.
1.25" dia. @40" (1016 mm) B.C. |
| Due to the continuous research and improvement program, data presented is subject to change without notice. |
